Can Pkhex Read a Save Extracted by an R4i Save Dongle?

Switch SD to NSP Dumper (SwitchSDTool)

This is a tool used to dump NSP files from the games/dlc/updates you legitimately obtained from the east-shop.
This is done through obtaining a nand backup via hekate, the required console specific keys via biskeydump from your switch, forth with other keys via kezplez needed for hactool. Information technology also requires googling for eticket_rsa_kek.
For minimal ban risk, Delete your wifi connection profiles, put your switch into aeroplane mode, Backup YOUR NAND, run biskeydump, follow the instructions for running kezplez to go keys.txt, RESTORE YOUR NAND.
At the stop of this, you volition then need hac disk mountain to dump PRODINFO.bin, and mount the SYSTEM partition.
How to dump NSPs from your SD menu for the Outset time
Step 1: Put your Switch into Airplane way and remove ALL wifi connection profiles. (Prophylactic measure to avoid a potential ban.) Step 2: Follow the tutorial at https://gbatemp.net/threads/backup-restore-your-nand-become-your-biskeys-tseckeys-keys-txt-guide.513386/ to dump your nand, keys.txt and biskey dump. Stride three: Restore the nand back up, if you take not already done then via above tutorial post-obit the dumping of biskey.txt and keys.txt. (Safety measure to avert a potential ban.) Step four: Grab Hac Disk Mount. Stride v: Power off your switch. Mountain the SD bill of fare from your switch to your PC. Step six: Open hac disk mount with Administrator Priveleges. (This is mandatory in club to install the Virtual Drive driver.). Step 7: Open up rawnand.bin in hac deejay mount. Step 8: Double click on PRODINFO Pace nine: Open biskey.txt and re-create in the Crypto and Tweak keys from Bis Key 0, and then click on Examination. Make sure the issue says Entropy OK. Step 10: Click on Browse in Dump to File, and scan to the location where you extracted this tool to. Footstep 11: Click on Get-go. Step 12: Click on the X. we are washed with PRODINFO. Step 13: Double click on System. Pace 14: Copy in the Crypto and Tweak keys from Bis Key two, the click on Exam. Make sure the consequence says Entropy OK. Stride 15: Install the Virtual Bulldoze commuter.  (If it errors, y'all need to reopen Hac deejay mount with administrator priveleges.) Stride xvi: Click on Mount. Step 17: Copy keys.txt from the SD carte du jour to where you extracted this tool. Step 18: Open up the tool. (If it errors, make sure you have installed .Net Framework 4.7.1) Step nineteen: Click on Select SD Folder. Cull the Drive that the SD is mounted to. Step xx: Click on Select System Path. Choose the Drive alphabetic character yous mounted the SYSTEM partition to. (A drive by default.) Step 21: Click on Select Decryption Path. Choose where yous want the decrypted NCAs to reside. Step 22: Click on Select NSP Output Path. Choose where you want your NSP dumps to be saved. Step 23: Google for eticket_rsa_kek. (if your keys.txt doesn't already incorporate this key.) Stride 24: Paste the results in the text field that says "Supplant me with the actual eticket_rsa_kek.". Footstep 25: The Log should say "ETicket RSA KEK is right.". If it does non, go back to step 22 and effort harder. Step 26: Click on "Find SD Key".  The log should say "SD Central Loaded". Step 27: Click on Load RSA KEK. The log should have two entries. "East-Ticket RSA Key Encryption Key loaded successfully" and "RSA Cardinal extracted successfully from PRODINFO.bin". Step 28: Click on Excerpt Tickets. Log should say "Dumping Tickets" followed shortly by "Washed. x Tickets dumped". Step 29: Click on Decyrpt NCAs. Log should show a bunch of "Processing --file--.nca - Decrypting, Done. Verifying, Verified.  (May start with Joining, Done). Pace 30: Click on the Games Tab, then Click on Parse NCAs.  This should finish, and all of your games nowadays on the SD card should exist listed, along with any Updates and DLC. Stride 31: Click on your preferred language, and move information technology to the elevation by click on Motion Up.  Repeat for each preference, setting them one beneath the superlative, etc... Step 32: Click on Pack ALL NSPs to pack everything, or select a game, and click on Pack Selected NSP to pack that NSP only. Step 33: Close the tool. Step 34: Unmount the SYSTEM partition and shut hac disk mount. Step 35: Unmount the SD card and put it back into your switch. How to Dump NSPs from new purchases / updates since last dumping
Footstep 1. Dump your nand, post-obit the guide at https://gbatemp.net/threads/backup-restore-your-nand-become-your-biskeys-tseckeys-keys-txt-guide.513386/ (Provided you saved biskey and keys.txt, you won't need to redump those.) Stride 2: Ability off your switch. Mount the SD menu from your switch to your PC. Step 3: Open upwards hac disk mount with Administrator Priveleges. (This is mandatory in lodge to install the Virtual Bulldoze driver.). Step 4: Open up rawnand.bin in hac disk mount. Step 5: Double click on Organization. Pace vi: Re-create in the Crypto and Tweak keys from Bis Key 2, the click on Test. Make sure the outcome says Entropy OK. Step 7: Click on Mount. Step 8: Open the tool. Step 9: Click on "Discover SD Key".  The log should say "SD Key Loaded". Step 10: Click on Load RSA KEK. The log should have two entries. "East-Ticket RSA Primal Encryption Central loaded successfully" and "RSA Central extracted successfully from PRODINFO.bin". Stride 11: Click on Extract Tickets. Log should say "Dumping Tickets" followed shortly by "Washed. x Tickets dumped". Step 12: Click on Decyrpt NCAs. Log should show a bunch of "Processing --file--.nca - Decrypting, Washed. Verifying, Verified.  (May kickoff with Joining, Done). Step 13: Click on the Games Tab, and then Click on Parse NCAs.  This should finish, and all of your games present on the SD card should be listed, forth with whatsoever Updates and DLC. Step 14: Click on Pack ALL NSPs to pack everything, or select a game, and click on Pack Selected NSP to pack that NSP simply. Step 15: Close the tool. Step sixteen: Unmount the SYSTEM partitioning and close hac disk mountain. Step 17: Unmount the SD card and put it dorsum into your switch.

SX Installer

SX Installer is an application for advanced championship direction, installation and launching.
Features:
- Power to display games every bit a table or icons. - Installation of NSPs from FTP, HTTP, NUT, SD, USB hard disk and NAND. - Ability to ignore the firmware requirements during installation. - Possibility of calculation several security installations. - Power to search titles. - Ability to list and delete tickets. - Ability to export all keys installed on the system. - Ability to overclock to install faster in certain situations. - Translation of the user interface in 12 languages. - Translation title of metadata in 12 languages. - Power to download and view game graphics (Internet connection required). - Ability to listing, view and delete application records (allows you to uninstall a DLC or an update) - Ability to list installed titles and start them (launch is possible only on five.ten and lower) - Ability to listing XCI and launch them automatically (launch is possible just 5.x and lower) - Ability to list and install new games available, with the ability to install all new games - Ability to automatically install the latest patch and all DLC with a game. - Ability to protect users from accidentally executing unsigned code by blocking the installation of all unsigned codes unless explicitly enabled. - Ability to listing and install the latest updates bachelor for your games, with the ability to install whatsoever updates - Ability to list and install the latest downloadable content available for your games, with the ability to install all downloadable content. - Power to list all incomplete installations (such every bit when the SD is corrupted or to substitution SD cards without copying data), with the possibility of reinstalling them all. - Ability to list and commencement NES, SNES, N64, GB, GBA, SMS, SG, SCD, GG and SG1000 RetroArch games. - List and launch Homebrew applications - File Browser that allows you to browse file systems, delete files (SD but) and copy files (only SD writing is writable)

Goldtree

Goldtree is a C# CLI tool for USB installations with Goldleaf. Currently it's only available for Windows systems, but it simplifies the process.
USB communication is slightly different from Tinfoil's one, and so Tinfoil's old Python script, AluminumFoil nor other tools won't work properly.
Goldtree volition ask you lot to choose a NSP after establishing connection with Goldleaf, and it will be received and installed by Goldleaf.

Rekado

Rekado es un lanzador de Payloads de Nintendo Switch para Android escrito en Kotlin.
La aplicación no necesita que tu dispositivo Android esté rooteado.
Los payloads de SX Loader, ReiNX y Hekate vinenen incluídos de serie.
Como usar Rekado
Ejecuta la aplicación Busca un cable para conectar tu dispositivo con la Nintendo Switch. Para un correcto funcionamiento, debe de ser un cable diseñado para la transmisión de datos,  no solo para carga. Es recomendable usar un cable USB A-to-C y un adaptador USB OTG. En la categoría "Payloads", haz click en el botón "+" para seleccionar un payload precargado en el almacenamiento de nuestro dispositivo o simplemente transfiere tu payload a la carpeta Rekado en su memoria. O puedes usar uno de los payloads precargados (SX Loader, ReiNX o Hekate) Pon tu Nintendo Switch en modo RCM de la forma que creas conveniente. Tu consola se encenderá por si misma cuando se conecte, asegúrate de dejar pulsado el botón "Volumen +". Conecta el dispositivo Android a la Nintendo Switch y permite el acceso para el USB si es necesario. Espera hasta que el selector de payloads se abra y selecciona el que quieres cargar. Espera que el payload termine de cargarse en tu consola.

FAQ
Does application crave Root?
Application doesn't require Root on your device.
Can it brick my device/console?
This should not happen when using the "right" payloads. Merely I am non responsible for possible issues.
I want to aid in Rekado's localization to my language, what should I practise?
Rekado's localization files placed in few places:
\app\src\main\res\values\strings.xml \app\src\main\res\values\arrays.xml \konae\src\chief\res\values\strings.xml You should translate it. Files marked with translatable="false" should not exist included in your localization. Later on finishing create Pull request and your localization volition be added in Rekado.
Credits
DavidBuchanan314 for creating NXLoader. ealfonso93 for contributing in this project. unbranched for Italian localization.

nxdumptool (ex gcdumptool)

Aplicación para realizar dumpeos de juegos de Nintendo Switch desde la propia consola.
Principales características de nxdumptool
Genera volcados completos de imágenes de cartuchos (XCI) con eliminación opcional de certificados y recorte opcional.
Genera paquetes de presentación de Nintendo (NSP) instalables a partir de aplicaciones base, actualizaciones y DLC almacenados en la tarjeta de juego insertada, la tarjeta SD y los dispositivos de almacenamiento eMMC.
Compatible con carros multijuego.
Cálculo de la suma de comprobación CRC32 para los volcados XCI/NSP.
Verificación completa del volcado XCI mediante la base of operations de datos XML de NSWDB.COM (NSWreleases.xml).
Base de datos XML y actualización in-app a través de libcurl.
Volcado preciso de la partición HFS0 en bruto, utilizando la cabecera HFS0 raíz de la tarjeta de juego.
Volcado de datos de archivos de partición HFS0.
Navegador de archivos de partición HFS0 con soporte de volcado manual de archivos.
Programa de volcado de datos de archivos de sección NCA ExeFS.
Programa NCA ExeFS section file browser con soporte de volcado manual de archivos.
Programa NCA RomFS section file dumping.
Programa NCA RomFS section file browser con soporte de volcado transmission de archivos.
Volcado manual del certificado de la tarjeta de juego.
Comprobación del espacio libre en la tarjeta SD.
Soporte de división de archivos para todas las operaciones.
Recuperación de los metadatos de la tarjeta de juego utilizando los servicios NCM y NS.
Cálculo de la velocidad de volcado, cálculo de ETA y barra de progreso.
Las operaciones relacionadas con los títulos SD/eMMC instalados requieren un archivo de claves ubicado en "sdmc:/switch/prod.keys".United states Lockpick_RCM para generarlas.
Aplicación creada por DarkMatterCore.

Switch Signature Patches (SigPatches)

Sigpatches de Nintendo Switch para Atmosphere (cargado vía fusee-primary.bin) y Hekate.
¿Cómo instalar los Signature Patches?
Descargar la última versión desde aquí mismo. Descomprimir el archivo y dependiendo de si usamos Hekate (fusee-secondary.bin) o Atmohspere (fusee-master.bin), pasar el indicado al directorio raíz de la tarjeta SD (nos pedirá sobreescribir archivos y carpetas, lo hacemos sobrescribiendo y fusionando, respectivamente) Nota: Si no sabemos que versión necesitamos tendríamos que verificar el archivo hekate_ipl.ini de la carpeta /bootloader/ de la tarjeta SD. Si no tenemos ese archivo, utilizar la versión para Atmoshpere (fusee-master.bin). Si vemos la línea payload = bootloader / payloads / fusee-primary.bin en su archivo hekate_ipl.ini, necesitamos la versión para Temper.
Si ve la siguiente línea fss0 = atmosfera / fusee-secundaria.bin en su archivo hekate_ipl.ini, necesitamos la versión para Hekate. Listo, ahora al arrancar Atmosphere ya estaría usando los SigPatches. Parches pata Hekate (Modo EZ)
Si queremos iniciar nuestro CFW con Hekate, se recomienda que cargar en cadena fusee-master. Este es el mejor método para iniciar Atmospehre sin presionar directamente fusee-primary.bin.
Para cargar en cadena Atmosphere, coloca el último fusee-main.bin en / bootloader / payloads /, luego edita el archivo hekate_ipl.ini para que contenga lo siguiente,
[Atmosphere CFW] payload = cargador de arranque / payloads / fusee-primary.bin Creado por iTotalJustice.

SX Server

Windows simply. SX Server allows network and USB installs for SX Installer, by serving NSP'south establish on your PC to the switch via SX Installer.
# USB Driver Install
Download Zadig. With your switch plugged in and SX Installer running, cull "List All Devices" nether the options carte in Zadig, and select libnx USB comms. Choose libusbK from the commuter list and click the "Supervene upon Commuter" button.
# Network server
Please ensure your windows firewall, or any other firewall is disabled, or SX Installer may not be able to connect. # Usage
run sxserver.exe. After you lot run the server, ensure NSP's are visible in the list. If they are not, change the path and click the "scan" button. First SX Installer on the switch, and either connect the USB cable from the switch to your PC, or set up a nut server location using the ip, port, username, and password displayed in SX Server. The games will bear witness up in SX Installer(in the "new games" department, etc) to install, the PC client is just a impaired server. Default username and password is invitee/invitee for network install. by Team Xecuter.

Awoo Installer

A No-Bullshit NSP Installer for Nintendo Switch.
Features
Installs NSP/NSZ files and split NSPs from your SD carte du jour Installs NSP/NSZ files over LAN from tools such as ns-usbloader Installs NSP/NSZ files over the internet by URL or Google Drive Installs and manages the latest signature patches chop-chop and easily Based on Adubbz Tinfoil, and will proceed to receive updates alongside it Uses XorTroll's Plutonium for a pretty graphical interface Merely werks Why?
Because Goldleaf tends to non "Just werk" when installing NSP files. I wanted a free software solution that installs titles, looks pretty, and doesn't make me rip my pilus out whenever I want to install a title on my Nintendo Switch. Awoo Installer does exactly that. Information technology installs titles. That's it!
If you lot want to practise other things like manage installed tickets, titles, and user accounts, check out Goldleaf!

Thanks to
HookedBehemoth for screen-nx and his Plutonium fork Adubbz and other contributors for Tinfoil XorTroll for Plutonium and Goldleaf blawar (married woman beater) and nicoboss for NSZ support The kind folks at the AtlasNX Discuck The also kind folks at the RetroNX Discuck namako8982 for the Momiji art TheXzoron for being a baka by Huntereb.

EdiZon

A Homebrew salvage file dumper, injector and on-panel editor for Horizon, the OS of the Nintendo Switch.
EdiZon consists of 3 different main functionalities.
Salvage file management Extraction of game saves. Injection of extracted game saves (Your own and your friends salvage files). Uploading of savefiles directly to https://anonfile.com. Batch extraction of all salvage files of all games on the system. Save file editing Easy to employ, scriptable and easily expandable on-console relieve editing. Lua and Python script back up. Congenital-in save editor updater. On-the-wing retentiveness editing Crook Engine like RAM editing. Freezing of values in RAM via Atmosphère's cheat module. Interface for loading, managing and updating Atmosphère cheats. All packed into ane piece of cake to use and piece of cake to install Homebrew.

by WerWolv98.

Neutos

A modified Atmosphere for Tinfoil usage.
NOTE 0: If yous don't accept an emummc, then note 1 does not use for you. If y'all wonder if you should proceed without ane or not, then you should consider leaving whatever and all switch modding over to your legal guardians.
Note ane: Yes, payload.bin BOOTS YOUR EMUMMC IF YOU HAVE AN EMUMMC.INI INSIDE OF /emuMMC/, WHOEVER IS SPREADING MISINFORMATION Virtually THAT You lot NEED HEKATE TO Kicking EMUMMC IS DOING THE Entire SWITCH HOMEBREW COMMUNITY A DISSERVICE. Please SCOLD WHOEVER TOLD YOU THAT, OR WHATEVER COMMUNITY IS SPREADING SUCH NONSENSE.
NOTE 2: the payload.bin provided MUST be used!
Annotation 3: Neither Tinfoil, or configurations for Tinfoil are included in this release.
Note four: Your games / save games are not stored anywhere in any of the folders listed in step 0, stop asking if your games/savegames will be deleted.

How to apply:
Make certain your sd card is fat32 formatted before starting!!
Step 0: Delete the folders called "Atmosphere", "Sept" on the root of the sd card earlier proceeding. Step ane: Extract the contents of the archive called "temper-0.11.one-neutos-7a0afe48+hbl-2.iii.1+hbmenu-3.iii.0.cipher" Stride 2A: Put the folders/files on the root of your sd carte du jour. (boot.dat, hbmenu.nro and any binder included) Step 2B: Overwrite everything if information technology prompts you to overwrite anything. Step 2C (optional): For users with SXOS subconscious partition EmuNAND switching to NEUTOS, download emummc_configs_for_sxos_hidden_partition_emunand_users.naught from the NEUTOS latest release and extract the emummc folder to root of the SD. Step iii: Inject the RCM payload included called "payload.bin", the same way you ordinarily inject anything else. (An "SX" branded dongle can exist used for this footstep.) Step 4: You tin now use Tinfoil 8+. People who have "TX" branded dongles, and also accept "Subconscious partition emuNAND" setups should consider downloading the pre-configured emummc configurations to be able to go on using them, while also changing to this release instead of whatever inferior package "SXOS" consists of.
They tin can do so past downloading the "emummc_configs_for_sxos_hidden_partition_emunand_users.zippo", extracting it and placing the "emummc" binder on their sd bill of fare. That'southward how quick and simple it is to alter.
This is a modified 0.eleven.one Atmosphere release nicknamed "NEUTOS", information technology has support for firmware versions upwards to and including 10.0, making it accept back up for Tinfoil 8+ out of the box. It contains the necessary changes for Tinfoil to be able to run.
past borntohonk.

RetroNX

RetroNX - Libretro/RetroArch for Nintendo Switch
"0.ix.8"
Courtesy of m4xw
----------------------------------------------------
For more information regarding RetroArch, the location/names of BIOS files, and compatibility with ROMs, delight refer to the official Libretro documentation at:
https://docs.libretro.com/
Employ the sidebar nether "Cadre Documentation" to read more about the core you're looking for.
----------------------------------------------------
RetroNX Specific:
To install, transfer the files every bit-is to the root of your Switch SD Card -- that is, 'retroarch_switch.nro' should be in /switch, and the main RetroArch directory should be in /retroarch.
To update/add cores every bit they are released, identify the corresponding .nro in /retroarch/cores/switch.
For the cores that need BIOS files, the system directory to place them in is located at /retroarch/cores/organisation.
For overlays, place a 1280x720px PNG formatted prototype with true transparency support (i.e. 32bit) in /retroarch/overlays; A practiced example would exist the overlay images provided in almost of the Stable Primary or Unstable Nightly cores. Brand sure it is named with respect to the name of the core in question, sans version number and such.
E.x. An overlay for SNES9x 2010 whose cadre is represented in rgui as "SNES9x 2010 1.52.1" would be named "SNES9x 2010". Brand sure there is no 'slope transparency', or half-transparencies -- either a pixel is on or off, and there is no current back up for non-whole transparency values. Currently, these are hardcoded and cannot exist disabled. If you wish to disable an overlay currently in utilize, you lot must either (re)motion the file, or name it to something not matching any cadre.
DISCLAIMER (1): If your SD carte filesystem is set to ExFAT, yous will unfortunately encounter spurious crashes, file abuse, and full general instability with regards to what's on your SD menu while using homebrew -- unofficial or official apps/games. To prevent this from causing problems in the time to come, we HIGHLY recommend formatting your Switch'south SD Carte under the FAT32 (or otherwise known every bit Fatty) filesystem. On Windows, this will require a 3rd-party application for cards larger than 32GB; on MacOS or *nix based systems, a simple format volition suffice.
DISCLAIMER (two): If you are using Team Xecutor's SX Bone in any class, we sadly cannot provide support as SX OS is known to have compatibility problems with currently existing homebrew. Please switch to a Hekate-based payload if possible.
----------------------------------------------------
Known Problems:
- Globally, the content scanner does not function; it will hardcrash the system if attempting a scan. Playlists must be created manually, or utilize the Favorites/Contempo Content systems already implemented. Annotation: This will launch the associated core by filename, and then if the core name is changed, the recent content entry will likely crusade a crash.
- If y'all have whatsoever configuration files used in the past, we HIGHLY recommend cleaning out your RetroArch binder of any and all content, and replace it with the files provided equally-is in this package. Refusing to do so may atomic number 82 to some variance in stability.
- NXEngine does non work as of the writing of this file (7/7/2018), and volition crash before the title screen regardless of the version of Douketsu Monogotari used (original Japanese, AeonGenesis's English translation, etc.)
- Wonderswan's threaded video (currently the default) does not piece of work properly equally of the writing of this file. Y'all may plow off threaded video in Settings -> Video -> Threaded Video, merely the performance volition be unsatisfactory. This is currently being worked on, and is simply an consequence in Wonderswan.
- PCE-Fast and Supergrafx (two versions of the same PC-Engine emulator) volition accept bug rendering the screen upon loading a 2nd ROM (stretched, squashed, etc.). This can be improved somewhat by setting the core overrided aspect ratio to 4:3 from the default 1:ane PAR.
- Sure cores (namely MAME 2003 and, in some cases, PCE-Fast/Supergrafx) will hardcrash the organisation when using a non-1:1 aspect ratio. Avert changing this for these specific emulators. MAME in particular volition also crash if the file is not part of the specifically labeled 0.78 ROMset, or otherwise corrupted.
- MAME 2003 currently crashes upon endmost larger ROMs (around the 20mb marker?). Press the Switch'south home push (taskkill) to get around this.
- SNES9x (Mainline/no date/non-2010) will hardcrash the arrangement when attempting to load more than one MSU-1 enabled game (ROMs that are modded to play CD-quality music/redbook audio). Mitigate this by closing Retro-NX via the menu or pressing the Switch'south dwelling button (taskkill) if you desire to play another MSU-1 enabled game. Loading normal SNES ROMs is fine, however.
- Too in SNES9x (Mainline or 2010), "Kirby's Dreamland iii" (and other games that use the Super NES's High Resolution screenmode) will 'zoom in' awkwardly when the feature is activated; this can exist examined in KD3, in the Friend Room of the first level with a high-resolution flowing leaves effect. This Tin be alleviated if activated mid-game by swapping between aspect ratios (thus re-initializing the video and re-orienting it), but will cause the exact reverse consequence if the game switches back to normal resolution manner. Alternatively, this can be disabled entirely by the cadre option "Enable hires mode," but await graphical inaccuracies in games that use it.
- mGBA only supports Game Male child Accelerate titles. While the core itself has preliminary support for DMG (monochrome Game Boy), Game Boy Color, and Super Game Boy playback, these will crash the core on RetroNX. Employ Gambatte for GB(C) playback instead.
- BlueMSX may or may not work at all, use fMSX
----------------------------------------------------
F.A.Q.
Q: My Switch has crashed/softlocked, and RetroArch doesn't work properly!
A: Beginning, brand sure yous are on a Horizon Bone version (I.Due east. Nintendo'southward Switch Bone) college than 1.0.0. Second, no thing which firmware you are on, Ever FORMAT YOUR SD Carte AS FAT32; NO EXCEPTIONS. If y'all go along to apply RetroNX nether the ExFAT filesystem, we cannot provide boosted support beyond the previously elaborated-upon disclaimer.
Q: I'g trying to save changes to the settings, but it doesn't commit!
A: Save the current configuration with no content loaded. You tin can do this from any core.
Q: Where practise I become updates to the cores?
A: For master/stable builds, the front end page on GBATemp (https://gbatemp.net/threads/development-thread-retroarch-libnx.505672/) will accept the master links available -- whenever the Master tree is updated, then will the builds in the corresponding links.
For nightly/unstable builds, you can sentry for build activity in the official repository for RetroNX (https://git.m4xw.cyberspace/Switch/RetroArch) underneath the respective cores' subdirectory, and selecting "CI/CD -> Pipelines". Downloadable builds will be marked with a download button to the right. Proceed with caution, equally we cannot guarantee these to be stable at all times.
Q: My question is not listed hither/where tin can I become for boosted support?
A: The fastest method for support and staying upwardly-to-date on progress for RetroNX, you tin join the Discord server with the post-obit link:
https://discord.gg/jTmfAEx
When you are posting about issues related to the cores (assuming y'all have read through this readme and identified your problem is uncommon/unrelated to the to a higher place), delight list the following pieces of data in your study alongside the consequence:
- Horizon Os version (I.Due east. Switch OS firmware version)
- Cadre used
- Whether core used is a Master/Stable or Nightly/Unstable; what is the builddate of said core?
- Version of the Hekate payload used
Make sure to post in the aqueduct listed #retronx-back up.
----------------------------------------------------
Credits:
m4wx - Primary developer of RetroNX/Libretro-NX.
lifajucejo, others - Supporting developers/contributers to the RetroNX project.
Switchbrew - Developers/contributors for the LibNX project and API which RetroNX is built on.
Original Libretro Team - Main developer of the Libretro/RetroArch project that RetroNX is congenital upon.
All the testers and users that report notable problems.
An Average Seong - Packaging the build in a convenient pack/writer of the very README you're reading! Thank you for reading to the end.

Incognito

Wipes some personal information from your Nintendo Switch by removing it from PRODINFO.
Purpose
It enables your switch tin go online while worrying slightly less about a ban. It prevents malicious homebrew applications from stealing your personal certificate. Disclaimers
This application does non remove all personal data from your Switch, and should not be treated as a truthful preventative measure confronting getting banned.
E'er have a NAND backup. I am non responsible for any bricks or bans. Employ at your own take chances, every bit this is an experimental program.
This application backs up your PRODINFO to the SD root. You lot should keep this backup in a more secure location, and not leave it on the SD carte where malicious applications can read information technology.
by Blawar.

Switch Cheat Codes for AMS and SX Bone

Colección de archivos con trucos para más de 1.250 juegos de Nintendo Switch, para usarlos con los Custom Firmwares Atmosphere o SX OS.
Como utilizarlos:
En SX Bone: Descomprimir el archivo descargado y mover la carpeta titles a la ruta SD CARD:/sxos/ En Atmosphere: Descomprimir el archivo, renombrar la carpeta titles a "contents" y colocarla en la ruta SD CARD:/atmosphere/ Los créditos van para todas las personas que han creado, actualizado y compartido sus trucos con la comunidad.
Pack de trucos creado por matias3ds.

Homebrew App Store (Switch)

A graphical frontend to the get packet manager for downloading and managing homebrew on video game consoles, such every bit the Nintendo Switch. This is a replacement to the Wii U Homebrew App Store.
Supported Platforms
Nintendo Switch
To run this program, a Nintendo Switch with access to the Homebrew Menu is required (currently requires an sd card).
1.x-5.x hbmenu instructions older three.0.0 hbmenu instructions - A quick summary of how to run it, provided you can get to hbmenu, is besides included beneath. For newer firmwares, see the link to the 4.x-v.x instructions higher up.
Quick summary
download latest appstore folder to sd:/switch/appstore/ download latest hbmenu.nro to sd:/hbmenu.nro put the SD menu (recommended formatted FAT32) in the Switch, and enter hbmenu (see instructions higher up) run "hb App Store" from within hbmenu when you're washed hit home to exit (and anthology again to go dorsum to hbmenu) Changelog:
New Features:
Search functionality with on screen keyboard Allow sorting of app list by: most recently updated, download count, alphabetically, download size, and randomly Add new "Advanced" category including some system/hekate modules Redesigned "App Details" screen to show much more than information about each app such as long scrollable clarification, download count, download size, and last updated date Added feedback reporting for any app to collect data about what works and doesn't work. This feedback will exist passed along to the app'south author if advisable Enhancements:
All touch and controller controls refactored and more responsive to input (highlights, buttons, etc) Add four-cavalcade "broad" view activated by pressing L or ZL in the app list New offline screen when internet connection isn't detected instead of empty progress bar Listing other apps by the same author from the details page Bug fixes:
Switched to roll instead of old hacky HTTP downloading scroll Empty folders are now removed upon uninstallation of a bundle Decadent cached icons should no longer freeze loading Uses romfs for storing images instead of an external binder Some settings for cleaning up any empty folders leftover by the erstwhile app and wiping the icon cache

RR (RetroReloaded CFW)

This is a CFW for Switch based on already existant CFW like, Temper, ReiNX, and SX OS.
This package volition allow you to boot a CFW like a Boot Manager. This is a solution All In One. ( AIO )
Utilize Book + , Volume - to motion across the CFWs bachelor and cull the ane you want pressing Power. Bear upon back up is incoming.
Installation
1.- Just download the latest release, extract it overwriting the existing files in your microSD.
2.- Kicking using one of the adjacent choices.
Choice 1:
You will detect the file payload.bin in the root of the microSD files. This packet provides that file. Copy that file into your Desktop PC computer.
Using a payload injector, like TegraRCMGui, points the file browser to the payload.bin file. Connect an USB-C cable to link your Switch to your PC. Enter into RCM mode. If you don't know how to practise that you will accept to look for further info. That's not covered hither.
Pick 2:
You lot also can use R4i Dongle. But using the official download link:
https://bit.ly/2EsOeKj
Connect your dongle to your PC using microUSB cable. Set it to Flash manner by pressing twice the push in the dongle. When you do that you will be able to browse the dongle folder. Drag & drop the new UF2 file downloaded from the link you used before. When the flash writing has finished the dongle binder will be closed automatically. You're gear up to utilise. Use your jig, utilise your dongle. Enter into RCM and you lot will run across the carte.

Kicking Managing director
You lot're ready to choose your CFW. Depending on your desires, you can boot ane of the iii existing flavours.
Outset choice:
[Atmosphere]
Currently 0.eight.4.
Firmwares supported: 1.0.0 - 7.0.0 / 7.0.ane
Included support for playing to Super Lan Play. You tin play with your Switch, even if it's banned, with other players, in multiplayer.
It's not the official online service.
2d choice:
[ReiNX]
Currently 2.0
Firmwares supported: i.0.0 - half-dozen.two.0
Included support for playing to Super Lan Play. You lot can play with your Switch, even if information technology'southward banned, with other players, in multiplayer.
It's not the official online service.
Tertiary choice:
[SX OS]
Currently: It depends on the kick.dat file you re-create in the boot of your microSD. Think to copy your license.dat file also.
Firmware supported: 1.0.0 - 6.two.0
Y'all can play in Super Lan Play service, every bit the other CFW. KIP patch was also included in SX Bone.

Edizon SE

Edizon SE es united nations dumpeador de partidas guardadas, un inyector y united nations editor en consola para Horizon, el sistema operativo de Nintendo Switch. Ten en cuenta que si estás usando Temper 0.10.0+, debe usar la última versión de EdiZon. Las versiones anteriores de EdiZon no funcionan en la Atmosphere más reciente.
Este fork está basado en los fundamentos de EdiZon 3.1 nightly. Los cambios hechos se localizan en el aspecto del hack de la partida guardada del juego.
Principales características de Edizon SE
Aquí están las nuevas características añadidas a la aplicación original:
Búsqueda de rango. Compare con la búsqueda de valor inductive. Se encontró la ubicación de la memoria del marcador. Mejora de la velocidad para hacer un valor entero pequeño en la primera práctica de búsqueda. El marcador se ajusta para cambiar la dirección de inicio chief y del montón en el lanzamiento posterior del juego. El marcador con cadena de punteros adjunta actualiza la dirección de memoria dinámicamente cuando la cadena puede resolverse en una dirección de memoria válida. Extraiga la dirección de memoria del código de trucos dmnt y agréguelo al marcador para explorar la ubicación de la memoria. Función Rebase para extraer el código de trucos dmnt de la cadena de punteros potencial creado para la versión inductive del juego. En la aplicación, la cadena de punteros busca la dirección en el marcador. Exportar el volcado a la aplicación de PC (bifurcado desde pointersearcher 0.four) para una búsqueda de cadena de punteros más potente. Importar el resultado de la búsqueda de la aplicación de PC para su validación y prueba. Cree el código de trucos dmnt a partir de la cadena de punteros encontrada. La funcionalidad original de Edizon para las partidas guardadas sigue estando disponible cuando ejecutamos la aplicación sin ningún juego en funcionamiento.

Funcionalidades de EdiZon SE
EdiZon contiene 3 diferentes funcionalidades principales:
Save file management Extraction of game saves. Injection of extracted game saves (Your own and your friends salvage files). Uploading of savefiles directly to https://anonfile.com. Batch extraction of all relieve files of all games on the system. Save file editingEasy to apply, scriptable and easily expandable on-console save editing. Lua and Python script support. Built-in relieve editor updater. On-the-fly retention editing Cheat Engine similar RAM editing. Freezing of values in RAM via Atmosphère'south cheat module. Interface for loading, managing and updating Atmosphère cheats. All packed into one easy to use and easy to install Homebrew.
Como instalar Edizon SE
Descarga la última versión de la aplicación desde esta misma página, de forma completamente gratuita. Unpack the downloaded null file, put the files on your Nintendo Switch'south SD bill of fare and let the folders merge. Use a gratuitous open source CFW similar Atmosphère to launch the hbmenu and starting time EdiZon from there. If you desire to utilize the cheat manager you absolutely have to use Atmosphère as only their cheats are supported. For the all-time experience, open the /atmosphere/system_settings.ini file and change dmnt_cheats_enabled_by_default = u8!0x1 to dmnt_cheats_enabled_by_default = u8!0x0. Aplicación creada por tomvita.

AmiiSwap

Nintendo Switch Amiibo switcher homebrew for nfp_mitm. AmiiSwap works with emuiibo and switch-nfp-mitm
How to use
Download and setup emuiibo or switch-nfp-mitm. Download AmiiSwap and place the nro file in the "switch" folder of your sd menu Using emuiibo
Create a folder named "emuiibo" at the root of your sd card Place your amiibo bin files in this folder Launch AmiiSwap, so select the amiibo you want -> press A -> Confirm the dialog Launch your game, to utilise the amiibo follow this combo Savor Using switch-nfp-mitm
Create a folder named "amiibos" at the root of your sd carte Create folders for each games you have amiibos for (Example: Mario Kart 8, Zelda BOTW, Super Mario Odyssey) Place your amiibo bin files in the corresponding folders Launch AmiiSwap, and then select a game -> select the amiibo you lot want -> press A -> Confirm the dialog Launch your game, to use the amiibo do A + Right Stick Downward Enjoy You tin modify amiibos whenever you want by just going back into AmiiSwap and selecting another amiibo.
How to navigate
Apply the dpad or the left stick to navigate menus Use A to select Apply B to go back to the main menu Credits
FuryBaguette - Well yeah I'm crediting myself for this project spx01 - His fork of switch-nfp-mitm you tin find here. I should as well give thanks averne and ogniK5377. (Fork of fork of fork) Subv - For making switch-nfp-mitm XorTroll - For emuiibo Lawmaking looks bad, please don't mind every bit this will be inverse in the side by side commit.

Incognito_RCM

Incognito_RCM is a bare metal Nintendo Switch payload that derives encryption keys for de- and encrypting PRODINFO partitioning (sysnand and emummc) and wiping personal data from your Nintendo Switch equally to go online while worrying slightly less virtually a ban. Information technology has a builtin fill-in and restore functionality.
It is heavily based on Lockpick_RCM and takes inspiration from incognito.
Massive Thanks to CTCaer, shchmue and blawar!
This project is in early stage, and so have a nand backup!!

Usage
Launch Incoginito_RCM.bin using your favorite payload injector Use bill of fare to make a backup! (Will exist written to sd:/prodinfo_sysnand.bin and sd:/prodinfo_emunand.bin respectively) Choose either Incognito (sysNAND) or Incognito (emuMMC) to wipe personal information If you ever want to revert, cull restore card points Known Issues
Chainloading from SX volition hang immediately due to quirks in their hwinit code, please launch payload direct Disclaimers
This application does not remove all personal information from your Switch, and should not be treated every bit a true preventative measure confronting getting banned. Always have a NAND backup. I am not responsible for any bricks or bans. Use at your own risk, equally this is an experimental program. This application backs upward your PRODINFO to the SD menu. Yous should keep this backup in a more secure location, and not leave it on the SD bill of fare where it could be bailiwick to corruption or be read by malicious applications. past jimzrt.

4NXCI

4NXCI is a tool for converting XCI(NX Card Image) files to NSP
4NXCI is based on hactool by SciresM
Thanks: SciresM, Rajkosto, Switch Brew
Usage
You should load your keyset file with -k or --keyset option followed past a path to information technology or place your keyset file with "keys.dat" filename in the same folder as 4NXCI
Required keys are:
Fundamental Proper noun Description header_key NCA Header Central key_area_key_application_xx Application fundamental area encryption keys Created NSP files are located in the same folder as 4NXCI with 'titleid.nsp' filename
4NXCI creates "4nxci_extracted_xci" folder as a temp folder, y'all can remove it later the conversion is done
*nil: ./4nxci [options...] <path_to_file.xci> Windows: .\4nxci.exe [options...] <path_to_file.xci> Options: -k, --keyset Set keyset filepath, default filepath is ./keys.dat -h, --help Display usage --dummytik Creates dummy tik and cert

PKHeX

PKHeX es un editor de partidas guardadas, programado en C#, de la serie de videojuegos Pokémon, compatible con títulos de Switch, Nintendo 3DS y GameCube.
Soporta los siguientes tipos de archivo:
Archivos de partidas guardadas ("main", *.sav, *.dsv, *.dat, *.gci) Archivos de la tarjeta de memoria de GameCube (.raw, .bin)que contienen las partidas guardadas de los juegos Pokémon de GC. Archivos de juego de Pokémon (.pk*) Archivos de regalo misterioso (.pgt, .pcd, .pgf, .wc*) incluyendo la conversión a .pk* Importación de equipos desde los Battle Videos desencriptados de 3DS Transferencia desde una generación a otra, convirtiendo formatos sobre la marcha.
Los datos se muestran en una vista que se puede editar y guardar. La interfaz se puede traducir con recursos/archivos de texto externos para que se admitan diferentes idiomas.
Los conjuntos de Pokémon Showdown y los códigos QR se pueden importar/exportar para ayudar a compartir.
Los contenedores de datos guardados de Nintendo 3DS usan united nations AES MAC que no se puede emular sin las claves de 3DS, por lo que se requiere united nations servicio de renuncia (svdt, save_manager, JKSM o SaveDataFiler).
No apoyamos ni aprobamos hacer trampa a expensas de otros. No uses Pokémon significativamente pirateados en la batalla o en intercambios con aquellos que no saben que se están usando Pokémon pirateados.
PKHeX es una aplicación creada por Kaphotics.

Argon NX SE

Argón es united nations gas noble. La palabra "Argon" viene del griego "Argon", neutro de "argos", que significa perezoso o inactivo. El argón recibió este nombre debido a su inactividad química.
Argon NX SE es un payload inmutable que es inyectado a tu Nintend oswitch vía Fusee Gelee Exploit.
Propósito
El propósito de Argon NX SE es permanecer inmutable, por lo que siempre podrás inyectarlo sin preocuparte si otros payloads se actualizan (siempre u.s.a. Argon NX para TegraSmash, TegraRCMGUI, TrinkedM0...).
Principales características
Creado con el nuevo Hekate HW Libs Soporte para Mariko Ratón Joycon UMS SD Carte du jour Theme delete SX Theme delete ATM Actualización SX Os Fijar fecha y hora RTC Barra de estado: Batería, hora y fecha, info de temperatura y más. Página con información del hardware Menú de recarga Payload que se autoejecuta Instalación
Descarga la última versión de Argon NX SE desde aquí mismo de forma completamente gratuita. Descomprime el archivo descargado y copia la carpeta "argon" al directorio raíz de la tarjeta SD. (Opcional) Recuerda que puedes añadir logos y payloads personalizados en argon/logos y argon/payloads, respectivamente. Inyecta el archivo del payload argon-nx.bin a tu Nintendo Switch Inject the argon-nx.bin payload to your switch in RCM mode using tegrasmash or TegraGUI. How tin it be?
When Argon NX is injected information technology automatically launches the payload.bin loacted at argon directory on your SD Card root.
If payload.bin is not present, Argon NX list all payloads located at argon/payloads, and you can select one of theme to launch information technology.
If you lot want, you can cull a payload logo by adding a 32 argb bmp(200*200) file named as the payload to argon/logos directory.
Example:
argon ├───logos │ default.bmp # Default logo │ fusee-master.bmp # Logo for fusee-principal.bin payload │ └───payloads fusee-primary.bin ReiNX.bin # Will exist rendered using default logo GUI

The sd card files of the image are:
argon ├───payloads │ fusee-primary.bin │ ReiNX.bin │ fusee.bin │ hekate.bin │ payload1.bin │ payload2.bin │ payload3.bin │ payload4.bin │ └───logos fusee-master.bmp default.bmp Reinx.bmp hekate.bmp fusee.bmp Compatibility
This payload will chainload any CFW or payload.
Some users reported issuses when chainloading SX OS. Just with Temper out there... who wants SXOS?
Roadmap
Config file to manage tabs titles and argon sd card directory tree. More tools inside tools tab. Credits
devkitPro for the devkitA64 toolchain and libnx back up. naehrwert and st4rk for the original hekate project and its hwinit lawmaking base. CTCaer for the continued hekate CTCaer Modern. SciresM, TuxSH and hexkyz for the base hwinit lawmaking of Argon NX by Guillem96.

Switch Theme Injector

Switch Theme Injector es una aplicación para crear y editar temas personalizados para Nintendo Switch.
Todos los firmwares superiores o igual al 5.0.0 están oficialmente soportados, mientras que firmwares más antiguos pueden ser compatibles pero no han sido testeados.
La aplicación es bastante sencilla de usar: los temas están en formato SZS y se extraen del menú de inicio RomFS, abre un szs compatible, abre una imagen de 1280x720 para usar como fondo y haz clic en guardar.

Principales características de Switch Theme Injector:
Lockscreen, home bill of fare and user settings support for firmwares 5.0 up to 6.i.0 From 6.0 support for news applet and console settings as split szs files, on <=5.x it's all in common.szs Older firmwares have been confirmed to piece of work but are not officially supported Automobile image injection, no external tools needed. Support for custom layouts, with built-in examples Car image to DDS conversion Auto NCA Extraction to easily extract the SZS files from the abode carte (based on hactool) Advanced tools to help people develop custom layouts or patches Web version with Auto-Theme to share themes No installation is needed, only extract the files and run the main exe, this app requires .NET Framework 4.6, and works on linux through wine (Some features similar prototype to DDS and NCA extraction are windows just).
Aplicación creada por exelis11.

NXThemes Installer

NXThemes Installer es una aplicación homebrew para Nintendo Switch que nos permite gestionar nuestros temas personalizados directamente desde la consola. Es capaz de instalar tanto temas en formato nx como en szs.

Principales características de NXThemes Installer:
Instalar el nuevo formato nxtheme Instalar el viejo formato szs Automáticamente detecta el nombre y firmware correcto para los archivos szs Dumpeo directo del home bill of fare nca, nunca más hacdiskmount Soporte para la mayoría de CFWs (Atmosphere, ReiNX o SX OS) ¿Cómo instalar temas con NXThemes Installer?
No tiene mucha historia. simplemente crea una carpeta llamada "themes" en el directorio raiz de tu tarjeta sd y copia los temas dentro de ella. Luego desde NXThemes Installer los verás todos y podrás instalar los que quieras.

Fluffy

A ane-dependency, feature-rich GUI for Tinfoil!
Features:
Evidence current NSP being installed. Individual NSP pick. Progress bar. Switch connected indicator. 5.x USB Fix (Thank you to satelliteseeker) Instructions For Use
Install and Setup Zadig Driver (Windows 10)
Download Zadig. With your Switch plugged in to your PC using a USB-C cable, open up TinFoil(on your Switch). This will ensure your Switch is visible. Open Zadig > Options > Listing All Devices. In the curl box higher up the push button "Install Driver", tap the arrow until arriving at "libusbK". Click "Install Commuter" Done! Install Python and PyUSB
Fluffy requires Merely the latest Python three and PyUSB. Download and Install Python iii. Ensure no previous version of Python is installed. This may cause an mistake "PyUSB not found". Open up Final/CMD Run "pip3 install pyusb" MacOS users must besides run "brew install libusb". For more info on brew, head to https://brew.sh/. Install TinFoil
These steps employ for all custom firmware. This includes but non limited to: Kosmos, ReINX, SXOS, etc. Download Recommended TinFoil Copy and paste "TinFoil.nro" to a folder named "Switch"(create it if necessary) on the root of your SD card.
How-To-Use
Consummate beginner? No problem.
Commencement follow the installation steps above for Zadig Driver, TinFoil, Python 3, and PyUSB. Washed? Allow's continue! On your Switch running Custom Firmware open up TinFoil > Championship Management > USB Install NSP Double-click on Fluffy.pyw to offset it Click "Open Folder" and browse to a binder where your NSPs are located then select "Open". A word of caution, try to select a folder with 3 or less NSPs. TinFoil is unable to parse big amounts of files. If "Switch Detected!" is visible. Click "Ship Header". Troubleshooting Tips
PyUSB Not Institute and I've followed all the steps!
Answer: Ensure no previous versions of Python are installed. If necessary, uninstall them. For example, if you take Python three.half-dozen.half dozen and Python three.vii.2 installed at the aforementioned time Fluffy may throw this fault.
What kind of cable does the Switch use?
Answer: USB blazon C cable.
Does Fluffy work on MacOS and Linux?
Reply: Absolutely! Python is cantankerous-platform and so Fluffy should work on both operating systems.
Which Custom Firmware works all-time with Fluffy and TinFoil
Answer: All of them will work the aforementioned. That is upwardly to you.
Nonetheless having problems? Consider making a issues report on this GitHub page to request assistance.

StarDustCFWPack

StarDust es un pack con los CFW actuales configurado para convivir bien entre si (Atmosphere, ReiNX, SX OS). Agrega también las app más básicas para empezar.
Instalación
1.- Descarga StarDustCFWPack desde aquí mismo. 2.- Extraer y sobrescribir todo en la micro SD iii.- Injectar payload.bin en la consola Si usas el PC recomiendo usar siempre este payload-forwarder Si usas R4s como yo, usa este .uf2 en el dongle CURRENT.UF2 instrucciones aquí http://bit.ly/2tLBTua Escoge una de las opciones de boot copiar Stardust-Toolkit en sd:/switch/ by Kronos2308.

gagebrokinights.blogspot.com

Source: https://www.dekazeta.net/foro/files/category/7-switch/page/2/?sortby=file_views&sortdirection=desc

Share this post